Your One-Stop Shop For Dynabrade Sanding Belt Sizes
Dynabrade offer a wide selection of abrasive belt tools, with these being listed below along with their applicable range of belt sizes.
Tool Range | Model Numbers | Range of Belt Sizes | |
Dynafile I | View Dynabrade Dynafile I Belt Sizes | 14000 | 3-19mm x 610-1120mm (1/8″-3/4″ x 24″-44″) |
Dynafile II | View Dynabrade Dynafile II Belt Sizes | 40320, 40326, 40330, 40335, 40352, 40353, 40381, 40610 | 3-19mm x 457-1120mm (1/8″-3/4″ x 18″-44″) |
Mini-Dynafile II | View Dynabrade Mini-Dynafile II Belt Sizes | 15002, 15003, 15013 | 3-13mm x 305-330mm (1/8″-1/2″ x 12″-13″) |
Dynafile III | View Dynabrade Dynafile III Belt Sizes | 15300, 15360, 15400, 15401, 15420 | 3-25mm x 457-610mm (1/8″-1″ x 18″-24″) |
Dynabelter | View Dynabrade Dynabelter Belt Sizes | 11462, 11475, 11476, 11477, 11486 | 13-51mm x 762mm (1/2″-2″ x 30″) |
Dynangle | View Dynabrade Dynangle Belt Sizes | 14200, 14300, 14303, 14306 | 25-51mm x 457-1143mm (1″-2″ x 18″-45″) |
The appropriate belt size for specific machines does however depend on the contact arm used, and so in this guide there is a breakdown of the suitable size for each arm to suit the tools listed above.
Dynabrade Dynafile I
There is only one model of the Dynabrade Dynafile I available, this being the 14000 which can also be purchased as a versatility kit with model number 14010.
-
Dynabrade 14000 Dynafile Abrasive Belt Tool
£659.60 +VATWorld-famous Dynafile replaces tedious hand filing and sanding. Grind, deburr, blend, polish, finish and more! Grind from contact wheel or platen pad. Finish and polish using slack of belt. For use on metal, plastic, fiberglass, composites, rubber, glass and stone.Add to basket -
Dynabrade 14010 Dynafile Abrasive Belt Tool Versatility Kit
£737.07 +VATDynabrade 14010 Dynafile Abrasive Belt Tool Versatility KitAdd to basket
The model 14000 can use the entire range of Dynafile I contact arms, with the range of Dynafile I belt sizes being 3-19mm x 610-1120mm (1/8″-3/4″ x 24″-44″). To find the appropriate size for your contact arm please refer to the table below.
Dynabrade Dynafile I Contact Arms | |||
Part Number | Belt Size | ||
11178 | 13x864mm (1/2″ x 34″) | ||
11179 | 13x864mm (1/2″ x 34″) | ||
11212 | 6x610mm (1/4″ x 24″) | ||
11213 | 13x610mm (1/2″ x 24″) | ||
11214 | 13x610mm (1/2″ x 24″) | ||
11215 | 6x610mm (1/4″ x 24″) | ||
11216 | 6x610mm (1/4″ x 24″) | ||
11217 | 13x610mm (1/2″ x 24″) | ||
11218 | 13x610mm (1/2″ x 24″) | ||
11219 | 6-13mm x 610mm (1/4″-1/2″ x 24″) | ||
11228 | 13x610mm (1/2″ x 24″) | ||
11231 | 13x610mm (1/2″ x 24″) | ||
11232 | 3-6mm x 610mm (1/8″-1/4″ x 24″) | ||
11234 | 13x864mm (1/2″ x 34″) | ||
11237 | 6x610mm (1/4″ x 24″) |
Dynabrade Dynafile I Contact Arms | |||
Part Number | Belt Size | ||
11238 | 13x610mm (1/2″ x 24″) | ||
11239 | 13x610mm (1/2″ x 24″) | ||
11240 | 13x864mm (1/2″ x 34″) | ||
11241 | 6x864mmmm (1/4″ x 34″) | ||
11243 | 13x610mm (1/2″ x 24″) | ||
11244 | 13x1120mm (1/2″ x 44″) | ||
11245 | 6x1120mm (1/4″ x 44″) | ||
11252 | 6-13mm x 610mm (1/4″-1/2″ x 24″) | ||
11254 | 6-13mm x 864mm (1/4″-1/2″ x 34″) | ||
11255 | 13x864mm (1/2″ x 34″) | ||
11258 | 13x610mm (1/2″ x 24″) | ||
11261 | 13x610mm (1/2″ x 24″) | ||
11262 | 13x610mm (1/2″ x 24″) | ||
11297 | 13x610mm (1/2″ x 24″) |
Dynabrade Dynafile II
There are seven models of the Dynabrade Dynafile II available, the most popular being the 40320 which is also available in both the 40324 metric and 40321 imperial versatility kits. Other models include: the 40326 and 40335 (which are the 40320 base model with different contact arms); the lightweight and low-profile 40352 and 40353 for improved ergonomics working in tight areas; the slow-speed 40381 for longer belt life and reduced heat generation with scotch-brite belts, and the 40610 electric version (with its own 40611 versatility kit.)
-
Dynabrade 40320 Dynafile II Abrasive Belt Tool
£655.18 +VATGrind, deburr, blend and polish, on metal, plastic, fiberglass, composites, rubber, glass and more. Grind from contact wheel or platen pad; finish and polish using slack of belt.Add to basket -
Dynabrade 40321 Dynafile II Abrasive Belt Tool Versatility Kit
£725.27 +VATDynabrade 40321 Dynafile II Abrasive Belt Tool Versatility KitAdd to basket -
Dynabrade 40324 Dynafile II Abrasive Belt Tool Versatility Kit, Metric Collet
£725.27 +VATDynabrade 40324 Dynafile II Abrasive Belt Tool Versatility Kit, Metric ColletAdd to basket -
Dynabrade 40326 Dynafile II Abrasive Belt Tool
£655.18 +VATDynabrade 40326 Dynafile II Abrasive Belt ToolAdd to basket -
Dynabrade 40335 Dynafile II Abrasive Belt Tool, for Non-Woven Nylon Belts
£655.18 +VATDynabrade 40335 Dynafile II Abrasive Belt Tool, for Non-Woven Nylon BeltsAdd to basket -
Dynabrade 40352 Dynafile II Abrasive Belt Tool
£655.18 +VATDynabrade 40352 Dynafile II Abrasive Belt ToolAdd to basket -
Dynabrade 40353 Dynafile II Abrasive Belt Tool, for Non-Woven Nylon Belts
£655.18 +VATDynabrade 40353 Dynafile II Abrasive Belt Tool, for Non-Woven Nylon BeltsAdd to basket -
Dynabrade 40381 Dynafile II Abrasive Belt Tool, Slow Speed
£802.00 +VATDynabrade 40381 Dynafile II Abrasive Belt Tool, Slow SpeedAdd to basket -
Dynabrade 40610 Electric Dynafile II Abrasive Belt Tool
£462.75 +VAT40610 Electric Dynafile II runs coated abrasive and non-woven nylon belts, and is ideal for countless applications on metal, plastic, fiberglass, solid surface, stone, glass etc.Add to basket -
Dynabrade 40611 Electric Dynafile II Kit
£534.86 +VATDynabrade 40611 Electric Dynafile II KitAdd to basket
All of the models above can use the entire range of Dynafile II contact arms, with the range of Dynafile II belt sizes being 3-19mm x 457-1120mm (1/8″-3/4″ x 18″-44″). To find the appropriate size for your contact arm please refer to the table below.
Dynabrade Dynafile II Contact Arms | ||
Part Number | Belt Size | |
11200 | 13x457mm (1/2″ x 18″) | |
11201 | 13x457mm (1/2″ x 18″) | |
11202 | 6x457mm (1/4″ x 18″) | |
11203 | 13x457mm (1/2″ x 18″) | |
11204 | 3-13mm x 457mm (1/8″-1/2″ x 18″) | |
11206 | 16-19mm x 457mm (5/8″-3/4″ x 18″) | |
11220 | 16-19mm x 457mm (5/8″-3/4″ x 18″) | |
11280 | 3-6mm x 457mm (1/8″-1/4″ x 18″) | |
11286 | 13x610mm (1/2″ x 24″) | |
11287 | 16-19mm x 520mm (5/8″-3/4″ x 20-1/2″) | |
11300 | 13x457mm (1/2″ x 18″) | |
11301 | 13x457mm (1/2″ x 18″) | |
11304 | 13x457mm (1/2″ x 18″) | |
11305 | 3-13mm x 457mm (1/8″-1/2″ x 18″) |
Dynabrade Dynafile II Contact Arms | ||
Part Number | Belt Size | |
11312 | 13x457mm (1/2″ x 18″) | |
11314 | 6x457mm (1/4″ x 18″) | |
11320 | 13x457mm (1/2″ x 18″) | |
11321 | 13x457mm (1/2″ x 18″) | |
11322 | 13x457mm (1/2″ x 18″) | |
11325 | 13x457mm (1/2″ x 18″) | |
11326 | 16-19mm x 457mm (5/8″-3/4″ x 18″) | |
11329 | 13x1120mm (1/2″ – 44″) | |
11330 | 6x457mm (1/4″ x 18″) | |
11337 | 13x457mm (1/2″ x 18″) | |
11341 | 13x457mm (1/2″ x 18″) | |
11350 | 19x864mm (3/4″ x 34″) | |
11360 | 13x457mm (1/2″ x 18″) |
Dynabrade Mini-Dynafile II
There are three models of the Dynabrade Mini-Dynafile II available, the most popular being the 15003 which is also available in the 15006 versatility kit. Other models include the 15002 vacuum-capable version and 15013 which is the same base model as the 15003 with a different arm.
-
Dynabrade 15002 Mini-Dynafile II Abrasive Belt Tool, Central Vacuum
£723.79 +VATDynabrade 15003 Mini-Dynafile II Abrasive Belt ToolAdd to basket -
Dynabrade 15003 Mini-Dynafile II Abrasive Belt Tool
£624.19 +VATDynabrade 15003 Mini-Dynafile II Abrasive Belt ToolAdd to basket -
Dynabrade 15006 Mini-Dynafile II Abrasive Belt Tool Versatility Kit
£672.15 +VATDynabrade 15006 Mini-Dynafile II Abrasive Belt Tool Versatility KitAdd to basket -
Dynabrade 15013 Mini-Dynafile
£624.19 +VATDynabrade 15013 Mini-DynafileAdd to basket
All of the models above can use the entire range of Mini-Dynafile II contact arms, with the range of Mini-Dynafile II belt sizes being 3-13mm x 305-330mm (1/8″-1/2″ x 12″-13″). To find the appropriate size for your contact arm please refer to the table below.
Dynabrade Mini-Dynafile II Contact Arms | ||
Part Number | Belt Size | |
15025 | 6-13mm x 305mm (1/4″-1/2″ x 12″) | |
15028 | 6-13mm x 305mm (1/4″-1/2″ x 12″) | |
15026 | 13x305mm (1/2″ x 12″) | |
15027 | 6x305mm (1/4″ x 12″) | |
15029 | 3x305mm (1/8″ x 12″) | |
15030 | 13x305mm (1/2″ x 12″) |
Dynabrade Mini-Dynafile II Contact Arms | ||
Part Number | Belt Size | |
15031 | 13x330mm (1/2″ x 13″) | |
15032 | 13x305mm (1/2″ x 12″) | |
15033 | 13x305mm (1/2″ x 12″) | |
15034 | 6-13mm x 330mm (1/4″-1/2″ x 13″) | |
15035 | 13x330mm (1/2″ x 13″) |
Dynabrade Dynafile III
There are five models of the Dynabrade Dynafile III available, the most popular being the 15300 which is also available in the 15302 versatility kit, and comes with a soft-grip handle assembly for applying additional force and achieving more aggressive stock removal. There are also four lightweight versions, three of these being supplied without a side handle which reduces the tool weight and allows greater maneuverability (models 15400, 15401 and 15420 – each with different contact arms), and the fourth is the 15360 which includes a side handle to assist the operator in achieving the extended reach offered by the arm it is supplied with.
-
Dynabrade 15300 Dynafile III Abrasive Belt Tool
£820.44 +VATDynabrade 15300 Dynafile III Abrasive Belt ToolAdd to basket -
Dynabrade 15302 Dynafile III Abrasive Belt Tool Versatility Kit
£893.49 +VATDynabrade 15302 Dynafile III Abrasive Belt Tool Versatility KitAdd to basket -
Dynabrade 15360 Dynafile III Abrasive Belt Tool
£820.44 +VATDynabrade 15360 Dynafile III Abrasive Belt ToolAdd to basket -
Dynabrade 15400 Dynafile III Abrasive Belt Tool
£675.10 +VATDynabrade 15400 Dynafile III Abrasive Belt ToolAdd to basket -
Dynabrade 15401 Dynafile III Abrasive Belt Tool
£711.25 +VATDynabrade 15401 Dynafile III Abrasive Belt ToolAdd to basket -
Dynabrade 15420 Dynafile III Abrasive Belt Tool
£832.99 +VATDynabrade 15420 Dynafile III Abrasive Belt ToolAdd to basket
All of the models above can use the entire range of Dynafile III contact arms, with the range of Dynafile III belt sizes being 3-25mm x 457-610mm (1/8″-1″ x 18″-24″). To find the appropriate size for your contact arm please refer to the table below.
Dynabrade Dynafile III Contact Arms | ||
Part Number | Belt Size | |
11200 | 13x457mm (1/2″ x 18″) | |
11203 | 13x457mm (1/2″ x 18″) | |
11204 | 3-13mm x 457mm (1/8″-1/2″ x 18″) | |
11206 | 16-19mm x 457mm (5/8″-3/4″ x 18″) | |
11286 | 13x610mm (1/2″ x 24″) | |
11287 | 16-19mm x 520mm (5/8″-3/4″ x 20-1/2″) | |
11305 | 3-13mm x 457mm (1/8″-1/2″ x 18″) | |
11312 | 13x457mm (1/2″ x 18″) | |
11320 | 13x457mm (1/2″ x 18″) |
Dynabrade Dynafile III Contact Arms | ||
Part Number | Belt Size | |
11702 | 6-13mm x 610mm (1/4″-1/2″ x 24″) | |
15321 | 25x457mm (1″ x 18″) | |
15326 | 25x610mm (1″ x 24″) | |
15350 | 25x457mm (1″ x 18″) | |
15351 | 25x457mm (1″ x 18″) | |
15356 | 25x457mm (1″ x 18″) | |
15357 | 25x457mm (1″ x 18″) | |
15368 | 25x610mm (1″ x 24″) | |
15375 | 25x610mm (1″ x 24″) |
Dynabrade Dynabelter
There are five models of the Dynabrade Dynabelter available, with these being: the standard duty 11462 and 11475, which are both the same base model with a side handle but different contact arms; the higher power, lower RPM heavy-duty model 11476 with a top control handle; the most powerful extra-heavy duty model 11477 which includes a pressure bar with top control handle, and the Dynabrade 11486 Dynabelter Accu-Grinder for grinding welds flat but without undercutting due to the adjustable guide tires either side of the contact wheel which control the depth of cut.
-
Dynabrade 11462 Dynabelter Finisher .7 hp, 7 Degree Offset, 18,000 RPM, Front Exhaust, for 1″ W x 60″ L (25 mm x 1,524 mm) Belts
£1,618.01 +VATDynabrade 11462 Dynabelter Finisher .7 hp, 7 Degree Offset, 18,000 RPM, Front Exhaust, for 1″ W x 60″ L (25 mm x 1,524 mm) BeltsAdd to basket -
Dynabrade 11475 Dynabelter Abrasive Belt Tool, Standard Duty
£1,354.61 +VATDynabrade 11475 Dynabelter Abrasive Belt Tool, Standard DutyAdd to basket -
Dynabrade 11476 Dynabelter Abrasive Belt Tool, Heavy-Duty
£1,475.61 +VATDynabrade 11476 Dynabelter Abrasive Belt Tool, Heavy-DutyAdd to basket -
Dynabrade 11477 Dynabelter Abrasive Belt Tool, Extra Heavy-Duty
£2,400.81 +VATDynabrade 11477 Dynabrade 11477 Dynabelter Abrasive Belt Tool, Extra Heavy-DutyAdd to basket -
Dynabrade 11486 Dynabelter Accu-Grinder Abrasive Belt Tool, Heavy-Duty
£1,705.80 +VATDynabrade 11486 Dynabelter Accu-Grinder Abrasive Belt Tool, Heavy-DutyAdd to basket
All of the models above can use the entire range of Dynabelter contact arms except for the 11870 which is only suitable for use on model 11477, with the range of Dynabelter belt sizes being 13-51mm x 762mm (1/2″-2″ x 30″). To find the appropriate size for your contact arm please refer to the table below.
Dynabrade Dynabelter Contact Arms | |||
Part Number | Belt Size | ||
11663 | 25x762mm (1″ x 30″) | ||
11668 | 25x762mm (1″ x 30″) | ||
11677 | 25x762mm (1″ x 30″) | ||
11681 | 25x762mm (1″ x 30″) |
Dynabrade Dynabelter Contact Arms | |||
Part Number | Model | ||
11682 | 13-25mm x 762mm (1/2″-1″ x 30″) | ||
11684 | 25x762mm (1″ x 30″) | ||
11717 | 25x762mm (1″ x 30″) | ||
11870 | 51x762mm (2″ x 30″) |
Dynabrade Dynangle
There are four models of the Dynabrade Dynangle available, these include: the compact model 14200 with a multi-positional side handle for working in tight areas, as well as the the single-motor 14300, the heavy-duty dual motor 14303 and the heavy-dual motor 14306 with removable platen (for sanding of flat workpieces), all three of which are designed for strap polishing of curved surfaces such as tubes.
-
Dynabrade 14200 Dynangle
£1,239.52 +VATDynabrade 14200 DynangleAdd to basket -
Dynabrade 14300 Dynangle II Abrasive Belt Tool, Single Motor
£2,407.45 +VATDynabrade 14300 Dynangle II Abrasive Belt Tool, Single MotorAdd to basket -
Dynabrade 14303 Dynangle II Abrasive Belt Tool, Dual Motor w/Platen
£2,985.89 +VATDynabrade 14303 Dynangle II Abrasive Belt Tool, Dual Motor w/PlatenAdd to basket -
Dynabrade 14306 Dynangle II Abrasive Belt Tool, Dual Motor w/Platen
£3,983.39 +VATDynabrade 14306 Dynangle II Abrasive Belt Tool, Dual Motor w/PlatenAdd to basket
Only the model 14200 Dynangle I can use the Dynangle contact arms, with the range of Dynangle belt sizes being 25-51mm x 457-1143mm (1″-2″ x 18″-45″). To find the appropriate size for your contact arm please refer to the table below.
Dynabrade Dynangle Contact Arms | |||
Part Number | Belt Size | ||
14261 | 25x457mm (1″ x 18″) | ||
14263 | 25x457mm (1″ x 18″) | ||
14266 | 25x457mm (1″ x 18″) |