01273 463677
CUSTOM MADE SANDING BELTS
Narrow & wide belts made to any size & specification. Use our belt calculators to order your own custom belts.

MORE INFO HERE ›
ON-SITE TOOL DEMONSTRATIONS
Specialist advice to reduce your process times and improve efficiency, with the aim of saving you time & money.

BOOK A SITE VISIT ›
TOOL SERVICING & REPAIRS
Send us your air tools for servicing to get them back up and running as good as new, with free advice on preventative maintenance.

BOOK A TOOL REPAIR ›
dynabrade-40320

Tool Profile: Dynabrade Dynafile Range

Introduced in 1969, the original Dynabrade Dynafile was intended to replace tedious hand-filing. Since then the design has been improved and refined, with various new models having been released over the last 50 years. These all offer different features suited to various applications, however with so many options to choose from it can make it difficult to know which is the right model for your job. This guide therefore provides a breakdown of the four types of Dynafile and their features.

Dynabrade Dynafile I

In the past any intricate sanding in hard to reach areas had to be done by hand, with mixed results due to operator fatigue. The revolutionary Dynafile was conceived on the basis that a powered belt sander with a small contact wheel would be much more effective, offering greatly reduced production times and a more consistent finish.

Using a removable spring-loaded contact arm system, there are over 25 different arms available with variations in shape, size, belt width and length. All arms are suitable for different applications, depending on the size/shape of the opening or edge which needs to be sanded and the type of work which needs to be done (either grinding on the contact wheel in corners, on the platen pad for flat sanding, or strap-polishing over curves and contours with the slack of the arm.)

  • The premier tool for machine shops, foundries, aerospace, sheet metal and stamping plants who grind & deburr.
  • 4 points of contact ensure the most reliable belt tracking of any tool on the market, with the Dynafile I being the only belt sander to reliably track 3mm wide belts.
  • Heavy-duty shroud protects the motor pulley and keeps debris from accumulating on and around the drive wheel.
  • Front exhaust ejects excess air directly on to the belt to cool it as it is running, therefore extending belt life by reducing excess heat on the joint.
  • Rigid construction improves durability for aggressive grinding on the contact wheel.
14000 Dynafile I Image

Dynabrade Dynafile II

An evolved version of its predecessor, the Dynafile II was designed with a particular focus on ergonomics during use. It is lighter and offers reduced vibration levels, providing more comfortable operation for the user. In addition this tool is very versatile, with a range of over 25 arms as well as being interchangeable with the Dynafile III selection of contact arms also.

Dynabrade 40320 Dynafile II Image
  • Wide variety of applications; grind, deburr, blend and polish, on metal, plastic, fibreglass, composites, rubber, glass and more.
  • Multi-position grinding head pivots 360° for full rotation and access to hard to reach areas.
  • Shorter belt housing offers longer workable reach.
  • Tactile, insulated grip for maximum comfort and reduced vibration transfer to the operator.
  • Easily converts to die grinder with optional 50010 Collet (1/4″) or 50015 Collet (6 mm).
  • Gearless motor for reduced downtime & maintenance.
  • Belt guard easily detaches for quick abrasive change, with the simple belt tracking adjustment knob.

As well as the standard models there are several variations available, including:

Dynabrade Mini-Dynafile II

Designed to be even more lightweight and ergonomic than the two older models, the Mini-Dynafile II has many of the same features. The key difference however is that it is more compact, and so while the workable reach is reduced due to the shorter length of the contact arms which it can use, it in fact offers greater access to low-clearance areas than where the bodies of the Dynafile I & II would allow.

  • Lightweight ergonomic design features 7° offset “soft touch” grip.
  • Multi-position grinding head pivots 360°.
  • Rear exhaust tool directs some air to front, to cool abrasive belt while running.
  • Belt guard easily swivels for quick abrasive change, with the simple belt tracking adjustment knob.
  • 11 contact arms available, many of which are offset to make the Mini-Dynafile II ideal for strap-polishing on radiused surfaces.
  • Easily converts to die grinder with optional 01644 (1/4″) Threaded Collet Insert.
  • Vacuum-capable model available for extracting dust in suitable applications
Mini-Dynafile II Image

Dynabrade Dynafile III

Dynafile III Image 3
A heavy-duty upgrade of the Dynafile II, this is a more powerful version for applications requiring aggressive stock removal. The most popular Dynabrade 15300 Dynafile III is supplied with an arm that has a serrated contact wheel, which applies greater pressure when grinding due to the individual serrations and therefore offers a more aggressive grinding action.

  • Dynafile® III Abrasive Belt Tool offers all the versatility of the world-famous Dynafile® II, while serving up more power (.7 hp / 522 W) for faster material removal.
  • Tool includes high-efficiency Rubber Drive Wheel, ideal for use with all abrasive belts.
  • Tool grinding head pivots 360°.
  • Soft grip handle assembly allows operator to apply additional force to contact wheel. Handle also offers enhanced control and maneuverability.
  • Includes side handle for two-handed use, offering the operator greater control and increasing the pressure that can be applied.
  • Range of 8 different contact arms available, as well as being interchangeable with the arms for the Dynafile II.
  • Model 15420 Dynafile III includes arm with unique 4″ diameter wheel, for grinding or blending right angle welds and fillet welds with no undercutting.