2″ (51mm) Roloc Disc Holder, 6mm Shank, Medium DensityAdd to basket £7.25 +VAT Roloc Disc Holder 50mm, 6mm Shank, Medium Density
3″ (76mm) Roloc Disc Holder, 6mm Shank, Medium DensityAdd to basket £7.75 +VAT Roloc Disc Holder 75mm, 6mm Shank, Medium Density
Red Nitro Ceramic Roloc Discs, 50/PackPremiumRead more £27.00 – £47.00 +VAT Red Nitro Ceramic Roloc Discs, 50/Pack
Part of the new tried and tested ‘Nitro’ range. Great for removing welds, dressing and grinding in hard to reach areas. A high quality red ceramic roloc disc with cooling topsize to help prevent overheating on heat-resistant metals such as stainless steel, and prolong disc life. These will improve your production rate: Red Nitro ceramic roloc discs last significantly longer than conventional aluminium oxide or zirconia discs and offer a much faster cut.
White Nitro Ceramic Stearate Roloc Discs, 50/PackPremiumRead more £30.00 – £52.50 +VAT White Nitro Ceramic Stearate Roloc Discs, 50/Pack
Part of the new tried and tested ‘Nitro’ range. Great for removing welds, dressing and grinding in hard to reach areas. Significantly reduce your overall grinding cost with our new White Nitro Ceramic Roloc Discs. Perfect for working on aluminium and titanium, White Nitro discs offer a much longer lifespan and faster cut rate than conventional discs. This is a unique product with 100% ceramic grain and a stearated topcoat which keeps the disc from loading and helps keep the substrate cool when grinding. Tough 3-ply polyester backing gives extra strength and helps prolong disc life. A great addition to your arsenal!
Green Nitro Ceramic Roloc Discs, 50/PackPremiumRead more £27.00 – £47.00 +VAT Green Nitro Ceramic Roloc Discs, 50/Pack
Part of the new tried and tested ‘Nitro’ range. Great for removing welds, dressing and grinding in hard to reach areas. A high quality green ceramic disc with cooling topsize to help prevent overheating and prolong disc life. Improve your production: Green Nitro Ceramic Discs last significantly longer than conventional aluminium oxide or zirconia discs and offer a much faster cut rate.
Nitro Fast-Cut Ceramic Roloc Discs, 50/PackPremiumRead more £26.00 – £50.00 +VAT Nitro Fast-Cut Ceramic Roloc Discs, 50/Pack
Part of the new tried and tested ‘Nitro’ range. Unique non-topsized ceramic gives superb cutting rate on mild/carbon steel. Great for removing welds, dressing and grinding in hard to reach areas. Offers huge improvements to your production speed due to the faster cut and longer disc life than conventional discs. Already very popular and available as low as 24 grit. Well worth a try!
Blue Turbo Zirconia Roloc Discs, 50/PackIndustrialRead more £17.00 – £33.50 +VAT Blue Turbo Zirconia Roloc Discs, 50/Pack
Part of the new 'Turbo' range. A popular zirconia roloc disc with excellent performance & cutting power on mild steel, and is excellent for treating weld seams and joints.
Green Nitro Zirconia Roloc Discs w/ Topsize, 50/PackIndustrialRead more £14.00 – £33.50 +VAT Green Nitro Zirconia w/ Topsize Roloc Discs, 50/Pack
Part of the new tried and tested ‘Nitro’ range. A popular heavy-duty zirconia with a durable 3-ply backing, it is ideal for dressing welds as well as most heavy-duty grinding applications. The cooling topsize helps to prevent overheating and burning of the workpiece, which also prolongs disc life. These will offer a significant improvement in production against aluminium oxide discs, as well as other non-topsized zirconia rolocs on stainless steel.
Nitro HD Surface Conditioning Roloc Discs, 50/PackPremiumRead more £37.00 – £63.50 +VAT Nitro HD Surface Conditioning Roloc Discs, 50/Pack
Nitro HD Surface Conditioning Roloc Discs are thicker and stronger and boast a faster cut rate and longer lifespan. These discs are a must if you are working on stainless steel or tough/exotic alloys, or on higher volume production lines where disc lifespan and performance is key. They consistently outperform the likes of 3M’s Scotch-Brite both in our independent tests and in the workplace on a wide variety of materials – and are far more competitively priced. Also work very well on tougher grinding jobs on both mild & stainless steel. Use to remove scratches after fibre/flap discs and for light grinding/deburring.
Turbo Surface Conditioning Roloc Discs, 50/PackIndustrialRead more £32.00 – £58.00 +VAT Turbo Surface Conditioning Roloc Discs, 50/Pack
Turbo Surface Conditioning Roloc Discs are made from good quality material and give a consistent surface finish. Blend in scratches, surface defects, light burrs and flashing. Very easy to use – offers uniform and consistent scratch pattern. A very cost-effective option for general use on a variety of materials.
Felt Roloc Discs 2″ (51mm) Dia, 50/PackIndustrialAdd to basket £56.50 +VAT Felt Roloc Discs 2" (51mm) Dia, 50/Pack
To be used with buffing compounds for polishing metals up to a bright or mirror finish, and should be used at lower speeds for finer finishing. Loading is reduced due to gaps in the fibre allowing residue to escape. Felt roloc discs are ideal for polishing in hard to reach areas.
Turbo-Star Roloc Discs 2-1/4″ (55mm) Dia, Grit 120, 50/PackIndustrialAdd to basket £41.00 +VAT Turbo-Star Roloc Disc, 2-1/4" (55mm) Dia, Grit 120, 50/Pack
The unique star shape of the Turbo-Star roloc discs means that they easily follow contours, and so are ideal for grinding fillet welds and other awkward areas.
SAIC are proud to be able to offer a huge range of roloc (quick-change) discs, including the new ‘Nitro’ and ‘Turbo’ brands. Providing fantastic value for money, these include everything from general purpose light stock removal discs, to premium quality heavy grinding discs designed to outlast the competition. Choose from coated abrasive (zirconia and ceramic) roloc discs, surface conditioning discs, stripping discs, unitised (for blending & finishing), and felt (for polishing). We can also offer specialist options for more demanding or niche applications. SAIC stock the backing pads and we can also recommend the right tool for the job depending on your budget.
Feel free to give us a call to discuss your requirements and to see if we can help you save money on your overall production costs!
- Widest range of materials available, all usually in stock
- FREE next-day delivery for all orders over £100
- Choose from: abrasive, surface conditioning (SCM), stripping, unitised and felt
- Sizes 50mm and 75mm abrasive & SCM in stock, 25mm & 38mm also soon to be available
- All discs are excellent quality at very low prices
- General purpose discs are suitable for most applications at a low cost
- Industrial grade discs are long lasting and suitable for constant use
- Premium grade offers superb price-performance ratio, with excellent cut rate and long lifespan
- Specialist discs available such as 100% white ceramic grain for aluminium and titanium, and star-shaped SCM for fillet weld dressing
- Recommended tools: Chicago Pneumatic CP7202 Pistol Sander for light use or for frequent industrial use we’d recommend the Dynabrade 48541 2″ (51mm) Right Angle Disc Sander or 48531 3″ (76mm) Right Angle Disc Sander
- Use with our high-quality 2″ and 3″ disc holders (thick rubber)
- ‘R’ screw-type fitting, also known as ‘TR’, ‘SL2’, ‘roloc’, ‘siafix’, ‘quick-release’, ‘quick change’ or ‘locking-type’, for quick and easy attachment/removal
- Large volume and resale options also available – please call us to discuss your requirements